• Modeling of Cancer Tumour Growth and Optimum Control of Chemotherapy Drug Doses 

  Faisal, Rahat Hossain (©University of Dhaka, 2024-04-25)

  Cancer is a leading cause of death in Bangladesh as elsewhere in the world. Huge effort and measures have been taken to control cancer even though an alarming increase in new cases is predicted by doctors and health ...
• Optimal Algorithms for Stereo Correspondence Estimation 

  Mondal, Md. Abdul Mannan (2024-04-24)

  Stereo correspondence has attained a position of overwhelming dominance in Computer Vision for long days for determining three-dimensional depth information of objects using a pair of left and right images from a stereo ...
• Assessment of Surface Water Pollution Caused by Tannery Effluents and Its Mitigation Strategies in Bangladesh 

  Tuj-Zohra, Fatema- (©University of Dhaka, 2024-04-22)

  Wastewater from leather processing industries generally contain high amount of toxic metal ions, organic and inorganic pollutants, which poses high risk to the ecosystem and human civilization. This thesis focuses on the ...
• Preparation of electrospun core-sheath nanofibers from poly(lactic acid)-collagen polymers and their biomedical applications 

  Mukta, Nasima Akter (©University of Dhaka, 2024-03-14)

  Biomaterials are applied to living organisms and used as biomedical appliances to accomplish, enhance, or substitute particular natural functions. Completely hydrophobic or hydrophilic biomaterials are not suitable to ...
• Preparation and characterization of natural fibres reinforced polymer composites 

  Ali, Md. Farhad (©University of Dhaka, 2024-03-13)

  The ever-increasing quantities of trash produced by the poultry and tannery industries, particularly chicken feathers, cow hairs, and waste leather fibers, pose serious challenges to maintaining a pristine natural ...
• Preparation and Characterization of Polymeric Composite Materials Using Natural Fibers in Bangladesh Environment 

  KHATUN, MOST. AFROZA (©University of Dhaka, 2024-03-12)

  Natural fibers have drawn a lot of interest for the use of reinforcing materials in composites as a sustainable and renewable resource. By adopting a compression molding technique and varying fiber contents (5, 10, 15, ...
• Optical and Morphological Characterization of Copper Zinc Tin Sulfide (CZTS) Nano-crystal Thin Film Solar Cell 

  Sharmin, Afrina (©University of Dhaka, 2024-02-19)

  Development of economical and highly proficient solar cells is crucial to gratify the rising global call. Solar energy generation is a technologically feasible method, though primarily it’s expensive. Copperzinc-tin-sul ...
• Assessment of Surface Water Pollution Caused by Tannery Effluents and Its Mitigation Strategies in Bangladesh 

  Zohra, Fatema-Tuj- (©University of Dhaka, 2024-01-02)

  Wastewater from leather processing industries generally contain high amount of toxic metal ions, organic and inorganic pollutants, which poses high risk to the ecosystem and human civilization. This thesis focuses on the ...
• ANTIMICROBIAL CONSTITUENTS FROM INDIGENOUS PLANTS GROWING IN BANGLADESH 

  MONIRUZZAMAN, MD. (©University of Dhaka, 2024-01-02)

  This thesis report about the separation and structure explanation of secondary metabolite from the indigenous plant named Stereospermum suaveolens (Roxb.) DC(family-Bignoniaceae). A total eight (08) compounds were isolated ...
• Development of eco-friendly, energy saving and cost-effective textile pretreatment dyeing and finishing 

  Hannan, Md. Abdul (©University of Dhaka, 2023-10-31)

  Conventional wet processing of textile system is responsible for consumption of huge utility (water, gas and electricity), high effluent load and excessive chemical cost. Lots of alternatives have been suggested for the ...
• Effects of Multiple Metal Oxides on Properties of ZTA-5TiO 2 -5MgO Composites 

  AL-AMIN, MD. (©University of Dhaka, 2023-10-10)

  The aim of this thesis is to investigate the effects of different oxides on the properties of zirconia toughened alumina (ZTA) composites, for structural (cutting tool) and biomedical (dental and orthopedic implants) ...
• Development of Graphene-Based Adsorbents for Removal of Heavy Metals from Tannery Effluents 

  Ahmed, Sobur (©University of Dhaka, 2023-10-09)

  Water, an essential part of the life cycle, is seriously affected during industrial, domestic and agricultural activities. Tannery effluents contain a huge amount of toxic metal ions, organic and inorganic pollutants ...
• Elemental Identification and Radiological Characterization of Core and Surface Samples for Environmental Assessment in Gas Field Regions of Bangladesh 

  Begum, Mahbuba (©University of Dhaka, 2023-06-13)

  In the oil and gas production industries all over the world, produced water contain the largest portion of wastes and the second largest portion of wastes is drilling waste, both of which are dumped into the evaporation ...
• Studies on the Development of Environment Friendly Diversified Jute Products by Chemically Modified Jute Fiber Blended with Cotton 

  Hossain, Md. Tarik (©University of Dhaka, 2022-08-31)

  Environment issues are major concern in the present-day. Natural fiber-based products are being cherished globally for the pollution free environment. Jute and cotton are the most affordable natural fibers in the existence ...
• Starfish Routing to Maximize Lifetime of Sensor Networks with Mobile Sink 

  Habib, Md. Ahsan (©University of Dhaka, 2022-08-29)

  Nowadays, the development of smart cities has become a dire necessity to improve the quality of human life. Wireless sensors and necessary information and commu- nication technology (ICT) infrastructures are the fundamental ...
• Estimation and Evaluation of Micronutrients and Vitamins intake during Pregnancy 

  Sultana, Maleka (©University of Dhaka, 2022-05-17)

  Iron deficiency anemia, folic acid deficiency, and calcium deficiency during pregnancy can lead to adverse outcomes for both the mother and the infant in developing countries, including Bangladesh. Preventive measures and ...
• Quality-of-Experience and Reputation Aware Incentive Mechanism for Workers in Mobile Device Cloud 

  Saha, Sajeeb (©University of Dhaka, 2022-04-20)

  Mobile Device Cloud (MDC) is a collaborative mobile cloud computing platform in which neighboring smart devices form an alliance of shared resources to mitigate resource-scarcity of an individual user device. It unfolds ...
• Development of Ultrasound Assisted Eco-friendly Leather Processing Techniques 

  MIA, MD. ABU SAYID (©University of Dhaka, 2022-01-16)
• Agro-fiber Reinforced Polymer Matrix Based Composite: Its Prospects in Bangladesh 

  Poddar, Pinku (©University of Dhaka, 2022-01-16)
• Morphological and Chemical Characteristics of Different Non-wood Species and Their Effect on Pulping 

  Ferdous, Taslima (©University of Dhaka, 2021-12-23)

  Bangladesh is a densely populated agricultural country. As the allocated forestland for pulpwood production is very limited and a substantial quantity of crops residues is generated each year, the later can substitute ...

View more